基于Romax行星齿轮传动振动特性仿真分析

以某行星齿轮传动为研究对象,分析行星齿轮传动原理;建立行星齿轮三维模型,导入仿真软件Romax对行星齿轮传动模态、固定内齿圈振动加速度、振动速度等振动特性进行仿真分析。仿真结果表明:行星齿轮传动不同阶数下的振动频率、振型和振动总位移不同;行星齿轮传动固定内齿圈的振动加速度、振动速度都呈现在某一均值波动的情况。该研究为避免行星齿轮传动发生共振、减小振动噪声及增加疲劳寿命提供理论依据。     

基于4G通信的尾矿库安全在线监测系统研究及应用

本文总结了尾矿库安全在线监测系统的通信技术及其应用的局限性,提出了基于4G通信技术的尾矿库安全在线监测系统架构,说明了分布式一体化数据采集传输单元的设计方案和优点；通过具体应用案例介绍了分布式一体化数据采集单元的应用效果。本文对4G通信技术的应用推广和提高矿山安全在线监测系统稳定性具有较大的现实意义。     

Polyaniline sensitized Pt@TiO2 for visible-light-driven H2 generation

Polyaniline is a typical conducting polymer with high migration electron rate, good stability, eco-friendly properties, and high absorption coefficients for visible light. In the present study, polyaniline decorated Pt@TiO₂ for visible light-driven H₂ generation is reported for the first time. The above-mentioned nanocomposite is prepared through a simple oxidative-polymerization and characterized by infrared spectroscopy, transmission electron microscopy, X–ray diffraction, thermogravimetric analysis, and ultraviolet–visible diffuse reflectance spectra. Polyaniline modification improves the absorption of the nanocomposite in visible light region via a photosensitization effect similar to dye–sensitization but does not influence the crystal structure and size of Pt@TiO₂. The polyaniline modified Pt@TiO₂ exhibits a remarkable visible light activity (61.8 μmol h⁻¹ g⁻¹) and good stability for H₂ generation (with an average apparent quantum yield of 10.1%) with thioglycolic acid as an electron donor. This work provides new insights into using conducting polymers, including polyaniline, as a sensitizer to modify Pt@TiO₂ for visible-light hydrogen generation.     

Hydrogen sorption behaviour of Mg-5wt.%La alloys after the initial hydrogen absorption process

In our earlier study, it has been shown that trace Na additions can improve the reaction kinetics of Mg–5%La (wt.%) alloys during the first absorption. However, the subsequent hydrogen desorption/absorption process of the Mg–5%La after the first absorption has not been investigated. In this study, we have investigated the hydrogen sorption behaviour of the Mg–5%La alloy after the first absorption in terms of phase evolution, and lattice expansion properties during desorption as function of temperature using in-situ synchrotron Powder X-ray Diffraction (PXRD) and in-situ High Voltage Transmission Electron Microscopy (HVTEM). Two distinct phase evolutions, a continuous phase transformation of LaH₃ → LaH₂ + ½ H₂ (from 250 °C) and decomposition of MgH₂ → Mg + H₂ (between 440 and 460 °C) were identified during the desorption. It is determined that this alloy is cyclable in the absence of Mg₁₂La intermetallic during the subsequent absorption/desorption cycling after the first hydrogen absorption.     

槽波透射勘探技术在寺河矿的精准应用

在井下综采工作面一侧巷道内激发槽波,另一侧巷道中接收通过采面透射的槽波。利用煤层与岩层的物理力学差异,分析在煤层中激发和接收到的槽波,以此来探查综采工作面中地质构造、煤体破碎区、应力集中区的位置,从而为后期探测地质构造参数、煤体破碎区注浆、应力集中区消突等工作的顺利进行提供基础数据,提高后期工程实施的针对性。     

Robustness analysis and distributed control of a networked system with time-varying delays

This paper is concerned with the robustness analysis and distributed output feedback control of a networked system with uncertain time-varying communication delays. This system consists of a collection of linear time-invariant subsystems that are spatially interconnected via an arbitrary directed network. Using a dissipation inequality that incorporates dynamic hard IQCs (integral quadratic constraints) for the delay uncertainties, we derive some sufficient robustness conditions in the form of coupled linear matrix inequalities, in which the coupled parts reflect the interconnection structure of the system. We then provide a procedure to construct a distributed controller to ensure the robust stability of the closed-loop system and to achieve a prescribed $\ell_2$-gain performance. The effectiveness of the proposed approach is demonstrated by some numerical examples.     

Unity direct chain with feedback series impedance based innovative negative group delay circuit

An innovative negative group delay (NGD) circuit theory on unity direct chain (UDC) topology is developed in this paper. The NGD UDC cells are based on the operational amplifier adder with feedback series impedance. Innovative topologies of high-pass NGD UDC cell composed of RL-series network, all-pass RC-parallel network and low-pass RC-series network are identified. It is a first time that all-pass NGD original topologies are defined. NGD analyses and synthesis methods of each NGD UDC cells are provided. The UDC cell based NGD functions are validated with SPICE simulations. The proofs-of-concept (POC) of UDCs behave as all-pass and low-pass NGD functions with group delay equal to −1 ms at very low frequencies. The low-pass NGD cut-off frequency is 424 Hz. The high pass NGD circuit generates −1 µs at the optimal NGD frequency of about 5.15 kHz. Further analysis of the operational amplifier gain and bandwidth effects is performed. The operational amplifier gain affects significantly the NGD level and bandwidth for the all considered UDC cells. Nevertheless, only the RC-parallel feedback based UDC cell is particularly sensitive to the operational bandwidth.     

移动物料信息分布式传输方法及应用

在流程工业生产中,移动物料计量信息的传输普遍采用电台和无线模块。接收电台周围环境严重影响计量信息的传输效果,尤其是钢结构厂房、电磁干扰区内,数据传输过程中的丢包率、误码率相当严重。本文提出一种多节点分布式传输方法,根据各个生产作业区环境条件设置相应的WIFI节点数,实现对作业区的无线信号覆盖。网络覆盖区内无线模块、PDA终端(PDA)、终端查询设备通过节点工作频段和阵列天线自适应调节,实现数据传输最佳化。铜熔炼生产现场测试表明,此种传输方法可以有效消除周围环境的电磁干扰,数据丢包率低于0.1%。     

磁性辊轮驱动装置在切割生产线中的应用

随着汽车及机床行业的发展,板料涂油工艺在汽车零部件生产中应用广泛,从而导致板料在自动切割生产过程中极易打滑跑偏,无法保证传输精度,本文所阐述的磁性辊轮驱动装置从根本上有效解决了此问题,在切割生产线中有广泛的推广价值。     

Combustion properties of a low-vulnerability propellant: an experimental and theoretical study using laser ignition

Ignition and combustion characteristics of a low-vulnerability propellant based on RDX are studied experimentally. Ignition is obtained using a laser diode. Experiments are performed in a cylindrical closed-volume reactor for different initial pressures and initial propellant masses under nitrogen and argon surrounding atmospheres. Ignition delays, maximal overpressures, and propagation rates are obtained for different initial pressures and laser powers. Thermodynamic predictions of overpressures are also compared with experimental ones. Finally, ignition probabilities for different laser powers and gaseous atmospheres are investigated using a revised Langlie method.